● Product Name：Type A1 Two Function Manual Hospital Bed
● Specific Use:Hospital Bed
● Backrest:back rest:0-70±2º
● Safe working load: ≥200kg
● IV pole hole:4
● Drainage hook:2
● Brake:Individual brake
● Supply Ability：1000 Set/Sets per Month
Packaging & Delivery
● Packaging Details：Cartan case
● Port：Tianjin Port
● Lead Time:
Quantity(Pieces) 1 - 50； >50
Est. Time(days) 30； To be negotiated
● One pair of headboard/footboard(HP-2)
● One pair of Aluminum alloy collapsible side rails
● ABS Tuck-away crank handle system (2)
● Handle control (1)
● I.V. Pole holes (4)
● Drainage hooks (4)
● Luxury dia. 125mm castors with individual locking system (4)
1, There are 4 pcs independent anti-collision bumper at four corners.
2, The transmission crank system: ABS folding handle, can be hidden under the bed. The telescopic rocker is made of stainless steel, steel universal joint, and the screw is extruded with 45# steel. It has interference protection, two directions limit function, flexible shaking and no noise. With ABS dust cover. In order to ensure the stability of the transmission system, the tie rod shaft and the tie rod are made of high-strength pipe
3, Side rail:
Toppling folding side rail, high quality electrophoretic aluminum alloy beam, surface hardening treatment, length 1450mm. Six 304 stainless steel flat flat tube pillar, The overall height of the side rail is 400mm.
The side rail is installed on the side of the upper frame, and fastened with hexagon bolt, the bolt is embedded into the side rail bottom tube, and covered with decorative cap to prevent the bolt from exposed, beautiful appearance.
4pcs Dia125mm individual brake casters
5, There are 1 hook in each side for drainage bag.